注释翻译---求助

qukewei1980_200

1.THEN REMOVE ALL OILS ,MOLD COATINGS, ECT. BY .SOLVEMENT CLEAING ,FINAL RINSE CLEAN SOLVENT.
V, G$ V1 o/ _( [' T- `2.MASK SURFACES AS SHOWN ON DRAWING .
; o, ^% m: e$ d3.ABRASIVE OUTER SURFACES PER SSPC-SP10.
NOTE: IF THE REQUIRMENTS FOR DISCOLORATION AND TO A SURFACE PROFILE OF 1.5 MILS CONFLICT CONCENTRATE ON PROFILE.
. j F$ t% `8 vNOTE : MUST SIGN AFIDAVIT .NO MORE THAN 12 HOURS ELAPSED BETWEEN GRIT BLAST AND PAINT.
4.CLEAN OFF ALL DUST WITH A VACUUM.
5.APPLY ONE COATING OF TNEMEC 140-1255(BEIGE) POLYAMIDOAMINE EPOXY ,PRIMER COAT ALL OVER 4 MILS DRY FILM THICKNESS 7 MILS WET FILM THICKNESS
9 f5 S' O, x0 p/ _ n6.FILL OUT PAINT QUALITY ASSURANCE FORM .
+ m6 d8 I1 }* f- C% h: U0 o7.AFTER PAINT IS DRY REMOVE THE MASKING.
大家好，上面7句是关于油漆的说明，有哪位仁兄能帮忙翻译以下，特别是第3，4，5，6条。小弟在此感激不尽