那位大侠帮我翻译成英语？非常感谢！

一颗豆芽 · 发表于 2013-1-10 08:36:02

1、打槽工装调整不到位
1.1、各底座安装不同轴
1.2、零件安装的松紧程度不适合
1.3、压杆安装的松紧程度不适合
1.4、打槽机空间小调整困难
2、加工前没有检查冲针的磨损程度
3、打槽机工装不适合M15/M16产品加工
3.1、底座不能安装高度为2.9mm的产品
3.2、压杆不能固定OD＜75的产品
3.3、压块不能压紧产品
4、冲针切削阻力大，尺寸变化大
4.1冲针形状不适合
5、气缸不稳定
5.1、气压不稳定
5.2、冲针松动
5.3、气缸松动
6、产品外径小，剖面小装夹困难
7、产品易塑性变形，加工困难
8、槽尺寸测量困难

兄弟的英语实在是太难了。上面这些需要给老板看，那位好心的帮帮忙啊！

一颗豆芽 · 发表于 2013-1-10 10:37:18

非常感谢各位

baikenor · 发表于 2013-1-10 10:32:44

谷歌翻译感觉不错翻译之后再翻回去可以验证有没有不准确的地方

唯独懂你 · 发表于 2013-1-10 09:01:34

In 1, playing the slot tooling adjustment does not reach the designated positionIn6 ~& E: }9 Q1 N" G2 M
1.1, the base mounting shaft+ I9 \" ^3 \( |7 [
1.2, the degree of tightness for mounting parts' Z& I% ~5 M" r) `- n$ O
1.3, the degree of tightness of the pressure rod is arranged forIn * K4 K9 z! L/ H. W4 A  W
1.4, playing the slot machine in the whole space is difficultIn $ t2 K6 d5 Q' i
2, prior to processing did not check the degree of wear of the punch needleIn   P8 K  g5 v. h" {+ Q& M0 n
3, playing the slot machine tooling is not suitable for M15\/M16 products processingIn
* w; x, y5 G5 u! r7 H% D' S* ]3.1, the base can not be installed height of 2.9mm products' E; D/ ]' Y# @0 k
3.2, push rod can not be fixed OD < 75 productsIn ; U9 X" V$ k1 @
3.3, the pressing block can not be pressed productsIn
* V$ [! K- B4 p/ {( ^* ?& {) C4, the punching needle big cutting resistance, dimensional change, [. {1 r2 k/ E: X/ S
4.1 punch needle shape is not suitable forIn  ]. F4 t/ A5 q7 [
5, the cylinder is not stableIn 8 |7 J. N- s# E; ?" w
5.1, the pressure of not stableIn   m; Y6 k( p6 y. R- P; ?
5.2, the punching needle looseningIn 4 A) z5 `0 }2 p8 M1 t9 l
5.3, the cylinder is looseIn 7 E4 f: p+ H* q6 d- l
6, the product of small external diameter, small difficult clamping sectionIn ) R3 Q# F0 Z9 n7 |1 V* @
7, the product easy to plastic deformation, difficult processing5 \& F% {6 Y; S& u) ]  v0 S
8, groove size measurement difficulties以后自己在百度上面可以翻译，中英文翻译就行。

		自动登录	找回密码
密码			注册会员

那位大侠帮我翻译成英语？非常感谢！

点评